1. On the toolbar, click the 
Open 'Procedure sequence' window button.
The Procedure sequence window opens.
2. If procedures are already available, click the row in the list in the procedure sequence window below which you would like to add another procedure.
3. In the Operations section, select Create.
The Procedure window opens.
4. Select the desired procedure from the appropriate folder. The following procedures are provided:
|
Notes: For each procedure, the settings are described in the appropriate chapter. The table below lists the appropriate references. Some procedures are only displayed if you have activated the respective add-on module (Enabling or disabling add-ons). For some procedures you need to select a file for data reading or saving, respectively (Opening and saving a project directories file). |
|
Folder Assignments |
|
|
Procedure |
Description |
|
Delete assignment results |
Deletes the assignment results (Deleting PrT/PuT assignment results) |
|
PrT assignment |
Calculates PrT assignments (Setting and calculating the parameters for PrT assignment) |
|
PuT assignment |
Calculates PuT assignments (Setting and calculating PuT assignment parameters) |
|
Connection import |
Reads PuT connections from file (Importing connections) |
|
Route import |
Reads PrT routes for a demand segment from file (Importing routes) |
|
Extended route import |
Reads externally calculated assignment results from file (Extended route import) |
|
Set signal programs |
Set desired signal program for all signal controllers (Automatically changing or switching off signal programs in Visum) |
|
Update impedances at node |
Re-calculates impedances of nodes and main nodes (Updating the impedances at all nodes and main nodes) |
|
Signal cycle and split optimization |
Calculates the optimum cycle time for the signal controller at the node and at the same time an optimal green time split for this cycle time (Optimizing signal cycle and split times) |
| Network-wide signal optimization |
Optimization of the offset times, optionally with optimization of the cycle and/or split times (Network-wide signal optimization) |
|
Assignment analysis |
Analyses the quality of an assignment (Calculating general procedures (PrT and PuT)) |
| Generate trip requests | Generate trip requests for a demand segment (Creating trip requests during the procedure sequence) |
| Tour planning | Execute tour planning (Executing tour planning in the procedure sequence) |
| Pseudo Dynamic Volumes (PDV) | Calculate pseudo-dynamic volumes (Fundamentals: Pseudo-dynamic volumes (PDV)) |
|
Folder Demand model |
|
|
Procedure |
Description |
|
Trip generation |
Calculates stage 1 (Trip generation) of the Standard 4-Step model (Starting the iterative repetition) |
|
Trip distribution |
Calculates stage 2 (Trip distribution) of the Standard 4-Step model (Calculating trip distribution) |
|
Mode choice |
Calculates stage 3 (Mode choice) of the Standard 4-Step model (Calculating mode choice) |
|
Time-of-day choice |
Distributes the demand to time intervals (Calculating Time-of-day choice) |
|
EVA trip generation |
Calculates the trip generation of the EVA-P model (Calculating EVA trip generation) |
|
EVA weighting |
Calculates evaluation of the EVA-P model (Calculating EVA weighting) |
|
EVA distribution / mode choice |
Calculates distribution and mode choice of the EVA-P model (Calculating EVA trip distribution and mode choice) |
|
Tour-based model - Trip generation |
Calculates the trip generation of the Tour-based Model (VISEM) (Calculating Tour-based model - Trip generation) |
|
Tour-based model - Combined trip distribution / mode choice |
Calculates trip distribution and mode choice of the Tour-based Model (VISEM) (Calculating tour-based model - combined trip distribution and mode choice) |
|
Nested demand |
Calculates nested demand which may contain the choice of the destination, means of transport and time-of-day alternatives in random order (Calculating demand with the Nested demand model). |
|
Nested demand gap calculation |
Calculates the relative deviation of the current demand weighted by the costs from the demand of the last iteration. The values are taken from the procedure Nested demand (Calculating Nested demand gap). |
|
Tour-based freight generation and distribution |
Calculates generation and distribution of the tour-based freight model (Calculating production and distribution using the tour-based freight model) |
| Tour-based freight trip generation | Calculates trip generation of the Tour-based freight model (Calculating trip generation using the tour-based freight model) |
|
Estimate gravitation parameters (KALIBRI) |
Estimates parameters of the utility function of the gravity model (Estimating gravitation parameters (KALIBRI)) |
|
ABM long-term location choices |
Calculates long-term location choices of persons for certain activities (Calculating ABM long-term location choices) |
|
ABM Nested Demand |
Calculates the destination and mode selection (Calculate ABM Nested Demand) |
|
Calculate demand matrices from trips |
The procedure aggregates the demand from trips into suitable demand matrices with a corresponding time reference (Generating demand matrices from trips). |
|
Generate path sequences from tours |
Creates path sequences from ABM tours. |
|
Start ActivitySim |
Starts ActivitySim in Visum (ActivitySim interface) |
|
Import ActivitySim output data |
Imports ActivitySim data (ActivitySim interface) |
|
Export ActivitySim input data |
Exports ActivitySim data (ActivitySim interface) |
|
Folder Multimodal |
|
|
Procedure |
Description |
|
Delete path sequences |
Deletes all path sequences |
|
Multimodal assignment |
Calculates a multimodal assignment (Selecting and executing the Multimodal assignment) |
| P+R lot choice | Calculates P+R lot choice (Calculating Park + Ride lot choice) |
| P+R leg split | Calculates P+R leg split (Calculating Park + Ride leg split) |
|
Calculate demand from path sequences |
Calculates induced demand for each demand segment from the paths of path sequence sets (Calculating demand from path sequences). |
|
Calculate skim matrix from path sequences |
Calculates skim matrices from path sequences (Calculating skim matrices from path sequences) |
|
Folder PuT analyses |
|
|
Procedure |
Description |
|
Reset PuT operating indicators |
Deletes calculated PuT operating indicator data (Discarding calculated PuT operating indicators) |
|
PuT operating Indicators |
Calculates PuT operating indicator data (Revenue calculation using a fixed revenue per PTripUnlinked) |
|
Spatial PuT analysis |
Evaluates the indicators of volume based on attributes of line route elements and the vehicle journey section (User Manual: Calculating spatial PuT analyses). |
|
Delete line blocks |
Deletes calculated PuT line block versions (Resetting line blocking results) |
|
Line blocking |
Calculates PuT line blocking (Executing the line blocking procedure) |
|
PuT interlining matrix |
Generates skim matrices for interlining trip relations between stop points (Performing the PuT interlining matrix procedure) |
|
Calculate service trip patterns |
Calculates groups of regular services (Calculating service trip patterns) |
|
PuT relation-based analysis |
Calculates skims between stop areas from a set of paths (Running a PuT relation-based analysis) |
|
Headway offset optimization |
Optimize headway offset between lines (Executing a headway offset optimization) |
|
Folder PuT passenger surveys |
|
|
Procedure |
Description |
|
Read survey data |
Reads survey data by PuT demand segment from file (Loading ridership data) |
|
Plausibilization of survey data |
Checks and completes survey data ( Check ridership data for plausibility) |
|
Direct assignment |
Assigns plausible paths by PuT demand segment to the network (Assignment of survey data) |
|
Folder Matrices |
|
|
Procedure |
Description |
|
Demand matrix correction |
Adjusts demand matrix data to current count data (Updating matrices with TFlowFuzzy or 'Least squares') |
|
Calculate PrT skim matrix |
Calculates PrT skim matrices (Calculating PrT skims) |
|
Calculate dynamic PrT skim matrix |
Calculate dynamic PrT skim matrix (Calculating PrT skims) |
|
Calculate PuT skim matrix |
Calculates PuT skim matrices (Calculating PuT skims) |
| Calculate stop area skim matrix |
Calculates stop area skim matrices (Calculating stop area skim matrices) |
|
Open matrix |
Reads matrix data from file (Importing matrix values during execution of the procedure sequence and Adding matrix values of a file during procedure sequence) |
|
Save matrix |
Saves matrix data to file (Saving matrices during procedure sequence execution) |
|
Combination of matrices and vectors |
Combines matrices and attribute vectors (Combining matrices and attribute vectors during the procedure sequence run) |
|
Matrix aggregation |
Generates main zone matrix based on aggregated values of a zone matrix (Calculating a main zone matrix from a zone matrix) |
|
Matrix disaggregation |
Disaggregates main zone matrix data and stores values in zone matrix (Calculating a zone matrix from a main zone matrix) |
|
Demand matrix calibration |
Projects a PrT demand matrix with the help of census data (Calibrating a PrT matrix) |
|
Distribution of demand matrix to paths |
Distributes matrix values as volumes to paths (Distribution of demand matrix to paths) |
|
Note: The AddIn folder contains scripts provided together with Visum (Embedding add-ins automatically via a project directory). |
|
Folder Miscellaneous |
|
|
Procedure |
Description |
|
Merge procedure results |
Merge procedure results of a step from distributed computing in the current Visum instance (Merging procedure results of distributed computing) |
|
Edit attribute |
Allows for editing the attribute data of all or all active network objects of the selected network object type (Editing attribute values during a procedure sequence) |
|
Set run and dwell times |
Re-calculates the run and dwell times of all or all active time profiles (Setting run and dwell times in the procedure sequence) |
|
Set link run times from line run times |
Replaces the link run time data by line run time data (Generating link run times from line run times in a procedure sequence) |
|
Read filter |
Reads filter settings from file (Reading filters during a procedure sequence) |
|
Reset all filters |
Resets all active filters (Initializing all filters during a procedure sequence) |
|
Go to the procedure |
Checks the convergence of current results and starts the iterative repetition of procedures, if applicable (Go to a procedure in the procedure sequence (Go to the procedure)) |
|
Run script |
Run scripts, for example Python or Visual Basic (Integrating script files or script code into the procedure sequence) |
|
NCHRP 255 |
Performs post-processing of PrT assignment results (NCHRP 255 (Post-processor for PrT assignments)) |
|
HBEFA-based emission calculation |
Emission data calculation according to HBEFA (Settings for emission calculation according to HBEFA) |
|
Delete results of emission calculation |
Deletes HBEFA-based emission results (Resetting emission calculation) |
|
Save version |
Saves version data file (Saving a version file) |
|
Group |
Creates a group of procedures (Forming and naming groups) |
|
Intersect |
Calculates target attribute values by intersecting the source attribute (Intersecting objects) |
|
Convert paths |
Converts paths (Converting the paths of a path set or demand segment) |
|
Territory indicators |
Calculates basic territory indicators (Calculating basic territory indicators) |
| Noise calculation according to RLS-19 | Determines the emissions of the length-based acoustic power level(Calculating noise volume) |
5. Adjust the settings required by the procedure, e.g. reference objects, variants or files.
6. For changes to the settings of the inserted procedure, mark the procedure and, in the Operations section, click Edit.
The procedure sequence is defined. You can now execute it (Executing procedures in the procedure sequence)
|
Note: The procedure sequence is stored if you close the window with OK. An error message appears if the parameters for one or several procedures have not been specified correctly. In this case, the procedure sequence is not stored. |
