Calculating Park + Ride leg split

Based on the P+R path sequence sets and the distribution of the demand across the P+R lots, the procedure calculates demand matrices for PrT and PuT (Fundamentals: Park + Ride leg split).

1.  On the toolbar, click the  Open 'Procedure sequence' window symbol.

The Procedure sequence window opens.

2.  To the procedure sequence, at the position of your choice, add the procedure P+R leg split of the Multimodal category (Setting up and starting the procedure sequence).

3.  In the row of the inserted procedure, click the button in the Reference object(s) column.

The Path sequence sets window opens.

4.  Select the desired path sequence set in the list.

Tip: To select multiple path sequence sets, hold down the Ctrl key while clicking the desired entries one by one.

5.  Confirm with OK.

The path sequence sets selected are listed in the Reference object(s) column.

6.  Make sure the added procedure is highlighted. Then, in the Operations section, click the Edit button.

The window P+R leg split - procedure parameters opens.

7.  Define the following settings for each path sequence set.

Element

Description

Path sequence set no

Code of the selected path sequence set

Result demand matrix (incoming)

Click this button to select the demand matrix to which you want to save the demand between origin zones and P+R lots.

Note

Number and name of matrix are then shown in the adjacent column.

Result demand matrix (outgoing)

Click this button to select the demand matrix to which you want to save the demand between P+R lots and destination zones.

Note

Number and name of matrix are then shown in the adjacent column.

Button Adopt for all path sequence sets

If required, click the button to apply the previous settings for all other path sequence sets in the list.

8.  Confirm with OK.

9.  Execute the procedure (Executing procedures in the procedure sequence).

The P+R leg split is calculated. The calculation results are listed in the result matrices.