You can edit the course of several line routes at the same time. Each modification then has the same effect on the selected line routes which would be affected if the line routes were edited separately.
1. Open the Line routes window (Opening the Line routes window).
2. Mark the line routes that you want to edit.
|
Tips: You can, for example, also mark several line routes if you mark one or more stop points in the network. Then all line routes will be marked, which traverse these stop points. Alternatively, you can mark several line routes in the Line routes window or one by one in the network (Marking line routes). |
The line routes are marked.
3. Right-click in the network display.
A shortcut menu opens.
4. Choose Edit course.
The Edit course window opens.
|
Note: At the top of the window, the <Number> line routes is displayed, which are marked. |
5. Specify the parameters for the path search (Line routes: specifying parameters for the path search).
|
Note: If necessary, n the Edit course window, click the Zoom button to enlarge the section with the courses of all marked line routes. |
6. Modify the previous courses.
|
Note: You can fix items first in order to keep them. Then you can modify the course between two fixed items by dragging the desired points to new positions while keeping the mouse button pressed (Basic rules: Editing a route course). |
The course of all line routes which traverse the route points is changed.
7. Confirm with OK.
The new course of the line routes is saved.
