Marking line routes

1.  Open the Line routes window (Opening the Line routes window).

2.  If required, restrict the number of line routes which is searched.

Element

Description

Only active ones

If the option has been selected, only active line routes are displayed.

3.  From the list, select the desired line route.

Tips: You can also select single line routes via the input field. To do this, enter the name of the line route in the field. The line route is selected in the list.

You can also mark several line routes if you mark one or more stop points in the network. Then all line routes will be marked, which traverse these stop points.

The course of the line routes is marked in the network.

4.  If required, click the Zoom button.

The network section is enlarged and the marked line routes are positioned in the middle of the section.

Tips: Use the Reset selection button if you want to remove the previously marked line routes from the selection.

You can also mark the line route courses of a line if you click on a stop point in the network which is traversed by a line route.

Alternatively, you can mark a line route by selecting the respective row in the list of line routes (Selecting list sections).