Similar as for the network display, you can set the desired graphic parameters for the block view display of line blocks. The options are as far as possible the same as the graphic parameters for the graphic and tabular timetables (Setting graphic parameters for the graphical timetable).
1. From the Line block editor menu, choose Edit graphic parameters.
The Edit graphic parameters window opens.
2. In the navigator, select the respective entry under Line block view.
The selected page opens.
|
Tip: Alternatively, in the Block view, right-click a line block item. Then from the shortcut menu, choose Edit graphic parameters. The window then opens with the line block item's page. |
3. Make the desired changes.
|
Note: Click the Preview button to immediately show your changes without closing the Edit graphic parameters window. |
|
Font page |
|
|
Element |
Description |
|
Size |
Text size in mm |
|
Font |
You can specify the font and the style of the block labels in a separate window by clicking in the field. |
|
Color |
In a separate window, you can specify a color for the block labels by clicking in the field. |
|
Header data page |
|
|
Element |
Description |
|
Show header data |
|
|
Display attributes |
For the output in the left column of the block header data, you can select a separate attribute for the block version, block, vehicle combination and the depot, which differs from the preset Standard labels. Note The other output values of the two block header data columns are determined automatically. |
|
Header data > Background page |
Here you can specify a uniform or a classified display for the background color of the block header data. The settings correspond to the graphic parameters for the table background in the tabular timetable (Specifying the background of the table). Note A distinction between "Active/Passive/Marked" does not exist for header data. |
If the option has been selected, the block header data is displayed in the block view with the selected attributes.
If the option has not been selected, only the ID and the selected attribute of the block version as well as the ID and the selected attribute of the block are displayed in the display area of the block day of each valid day level.|
Element |
Description |
|
Inner label section |
Show line 1 If the option is selected, the top line of the label is displayed within the blocks. Show line 2 If the option is selected, the bottom line of label is displayed within the blocks. |
|
Outer label section |
Show top label If the option is selected, the label is displayed above the blocks. Show bottom label If the option is selected, the label is displayed below the blocks. |
|
Line spacing section |
Inner label (%) Input value for the spacing between the inner label and the border of the block in percent of the line spacing. Outer label (%) Input value for the spacing between the outer label and the border of the block in percent of the line spacing. |
|
Display of blocks > Vehicle journey |
|
|
Element |
Description |
|
Inner label section |
Line 1 and Line 2: For both lines of the labels in blocks representing a vehicle journey, you can select one attribute each that differs from the Standard label. You may alternatively select No label. |
|
Outer label section |
For each labeling position at blocks that represent a vehicle journey, you can select an attribute that differs from the preset Standard labels. You may alternatively select No label. You can transfer your settings to the other line block items using the link Use attributes for other line block items. |
|
Display of active blocks section |
You can automatically classify the active line block items in the same color as the route courses using the link Use display of route courses (Displaying route courses in the network editor window). Note You can view and edit the classification on page Vehicle journey > Block > Active. |
|
Vehicle journey > Block page |
Via the tabs Active (direction 'Up') and Active (direction 'Down') you specify the display of active vehicle journeys in either direction. You can select either uniform or classified display. If the Classified display option is selected, you can classify and display active vehicle journeys by an attribute (Displaying classified objects based on attribute values). On the Marked tab, you specify the display of the vehicle journeys marked. On the Conflict tab, you specify the display of conflicting vehicle journeys. On each tab, you can select a specific Color for Filling and Margin. Here, classification is not provided. |
|
Display of blocks > Empty trip page |
|
|
Element |
Description |
|
Inner label section |
Line 1 and Line 2: For both lines of the labels in blocks representing an empty trip, you can select one attribute each that differs from the Standard labels. You may alternatively select No label. |
|
Outer label section |
For each label position at blocks that represent empty trips, you can select an attribute that differs from the preset Standard label. You can transfer your settings to the other line block items using the link Use attributes for other line block items. |
|
Empty trip > Block page |
Via the tabs Active (direction 'Up') and Active (direction 'Down') you specify the display of active empty trips in either direction. You can select either uniform or classified display. If the Classified display option is selected, you can classify and display active empty trips by an attribute (Displaying classified objects based on attribute values). In the Marked tab, you specify the display of marked empty trips. You can select a specific Color for Filling and Margin. Here, classification is not provided. |
|
Display of blocks > Layover in depot page |
|
|
Element |
Description |
|
Inner label |
Line 1 and Line 2: For both lines of the labels in blocks representing a layover in depot, you can select one attribute each that differs from the Standard label. You may alternatively select No label. |
|
Layover in depot > Block page |
Via the tabs Active (direction 'Up') and Active (direction 'Down') you specify the display of active depot layovers in either direction. You can select either uniform or classified display. If the Classified display option is selected, you can classify and display active downtimes at depots by an attribute (Displaying classified objects based on attribute values). In the Marked tab, you specify the display of marked layovers in depots. You can select a specific Color for Filling and Margin. Here, classification is not provided. |
|
Display of blocks > Pre-/Post-preparation time |
|
|
Element |
Description |
|
Inner label section |
Line 1 and Line 2: For both lines of the labels in blocks representing a pre-/post-preparation time, you can select one attribute each that differs from the Standard label. You may alternatively select No label. |
|
Outer label |
For each labeling position at blocks that represent the pre- and post-preparation time, you can select an attribute that differs from the preset Standard labels. You may alternatively select No label. You can transfer your settings to the other line block items using the link Use attributes for other line block items. |
|
Pre-/Post-preparation time > Block page |
Via the tabs Active (direction 'Up') and Active (direction 'Down') you specify the display of active pre- and post-preparation time in either direction. You can select either uniform or classified display. If the Classified display option is selected, you can classify and display active pre-/post-preparation times by an attribute (Displaying classified objects based on attribute values). In the Marked tab, you specify the display of marked pre-/post-preparation times, and in the Conflict tab, you specify the display of conflicting pre-/post-preparation times. In each tab, you can select a specific Color for Filling and Margin. Here, classification is not provided. |
|
Display of blocks > User-defined |
|
|
Element |
Description |
|
Inner label section |
Line 1 and Line 2: For both lines of the labels in blocks representing a user-defined block item type, you can select one attribute each that differs from the Standard label. You may alternatively select No label. |
|
Outer label section |
For each label position at blocks that represent a user-defined block item type, you can select an attribute that differs from the preset Standard label. You may alternatively select No label. You can transfer your settings to the other line block items using the link Use attributes for other line block items. |
|
User-defined > Block page |
Via the tabs Active (direction 'Up') and Active (direction 'Down') you specify the display of active user-defined block item types in either direction. You can select either uniform or classified display. If the Classified display option is selected, you can classify and display active user-defined block item types by an attribute (Displaying classified objects based on attribute values). In the Marked tab, you configure the display of marked user-defined block item types. You can select a specific Color for Filling and Margin. Here, classification is not provided. |
|
Display of blocks > Free action |
|
|
Element |
Description |
|
Inner label section |
Line 1 and Line 2: For both lines of the labels in blocks representing a free action, you can select one attribute each that differs from the Standard label. You may alternatively select No label. |
|
Outer label section |
For each label position at blocks that represent a free action, you can select an attribute that differs from the preset Standard labels. You may alternatively select No label. You can automatically classify the colors for active block items as for line route using the link Use display of route courses (Displaying route courses in the network editor window). |
|
Free action > Block page |
Via the tabs Active (direction 'Up') and Active (direction 'Down') you specify the display of active free actions in either direction. You can select either uniform or classified display. If the Classified display option is selected, you can classify and display the active free actions by an attribute (Displaying classified objects based on attribute values). In the Marked tab and in the Passive tab, you configure the display of marked or passive free actions. In each tab, you can select a specific Color for Filling and Margin. Here, classification is not provided. |
|
Free action > Pre-/Post-preparation time page |
Show time labels of pre- and post-preparation times in minutes
If the option has not been selected, the format hh:mm:ss is used. On each tab, you can select a specific Color for Filling and Border. Here, classification is not provided. |
|
Display of blocks > Forced chainings |
|
|
Element |
Description |
|
Invalid forced chainings |
Use the drop-down list to select the desired color for the display of invalid forced chainings. |
|
Valid forced chainings |
Use the drop-down list to select the desired color for the display of valid forced chainings. |
|
Implemented forced chainings |
Use the drop-down list to select the desired color for the display of implemented forced chainings. |
|
Marked forced chainings |
Use the drop-down list to select the desired color for the display of marked forced chainings. |
|
Display of blocks > Margins |
|
|
Element |
Description |
|
Show upper timeline |
A timeline appears at the top margin. |
|
Show bottom timeline |
A timeline appears at the bottom margin. |
|
Show left margin |
A margin appears on the left side. |
|
Show right margin |
A margin appears on the right side |
4. Make the settings for the border, header, and footer on the Print frame page (Setting the print frame)
5. Confirm with OK.
The settings are applied. The display in the Line block editor will be updated accordingly.
|
Note: Via the menu Line block editor > Graphic parameters entry Reset graphic parameters, you discard the current line block editor graphic parameters and restore the default settings. You can save the line block editor graphic parameters and read them in again later. The procedure is the same as for timetables (Saving graphic parameters for the graphical and tabular timetable and Reading graphic parameters for the timetable). |
