Limiting list display to a selection

In some lists, you can reduce the number of listed objects by specifying a selection criterion.

Topics
Displaying GIS objects or POIs of one category only

In the GIS objects or Points of Interest list, you can select a category. Then, the list displays only the objects of this category.

1.  Open the desired list (Opening a list).

2.  In the drop down list of the toolbar, select a category.

The list contains objects of the selected category only. In the case of POIs, it also contains all objects of the subcategories of the selected category.

Limiting the display to a demand segment

In some evaluation lists, you can limit the display to one demand segment or display jointly assigned demand segments in parallel.

1.  Open the desired evaluation list (Opening a list).

The list is displayed.

2.  Select a demand segment in the DSeg drop-down list or a combination of the desired demand segments.

The evaluations are only displayed for the selected demand segment or combination, depending on the selection.

Limiting the display to a path set or to a demand segment

In some evaluation lists, you can limit the display to a path set or to a demand segment.

1.  Open the desired evaluation list (Opening a list).

The list is displayed.

2.  In the selection list DSeg / Path set, select the desired entry.

The evaluations are displayed for the selected path set/demand segment only.

Note: If you select the display of all demand segments in the PuT paths list, you can show specific attribute values like, for example, volume, fare, number of fare zones, in separate columns (Selection of multiple attributes).
Limiting the display to active time profiles or active links

In some evaluation lists, you can limit the display to active time profiles (list PuT path legs) or links (list PrT paths on link level).

1.  Open the desired evaluation list (Opening a list).

The list is displayed.

2.  Select the option Only active time profiles or Only active links.

Only the active time profiles or links are displayed in the list.

Limiting the path list display to a selection

In paths or passenger transfers lists, you can reduce the list display to a selection.

1.  Open the desired path list (Opening a list).

The list is displayed.

2.  Under Selection, select one of the following views.

Element

Description

All routes

All paths or routes of the assignment are displayed.

Flow bundle routes

All paths or routes of the current flow bundle output are displayed.

Note

This entry is only provided for the paths of a demand segment. It is not provided for the paths of a path set.

Filter for OD pairs

All paths or routes of the current OD pair filter are displayed.

The selection is displayed.

Hiding territory PuT detail objects with no result

You can hide rows with no indicators in the Territory PuT details list. Empty rows are caused by the fact that not all objects occur in the network and therefore no indicators can be calculated for these objects.

1.  Open the Territory - PuT details list (Opening a list).

2.  Select the option Hide objects with no result.

All rows without calculated indicators are hidden.

Limiting the path list display to an origin zone

A list of paths displays the paths of the first origin zone in the list. You can change the selection of the origin zone or display all origin zones.

1.  Open the list PuT paths or PrT paths (Opening a list)

2.  Click the button next to Origin zone filter.

The Filter origin zones window opens.

3.  Select the desired origin zone (Finding network objects in the network)

The list displays all paths of the selected origin zone or all paths.

Hiding walk links in PuT path lists

The PuT path leg list usually displays all path legs including walk links. If required, you can hide all PuT walk links (egress, transfer and access) in the list.

1.  Open the PuT path legs list (Opening a list).

The list is displayed.

2.  Select the Only PuT path legs option.

In the list, the walk links are hidden.

Displaying boarding passengers, alighting passengers and transfer events at stops

In the list PuT analyses > Passenger transfers stops / time profiles, you can display the origin boardings, destination alightings, and passengers transferring at a specific stop.

1.  Open the list PuT analyses > Passenger transfers stops / time profiles (Opening a list).

2.  Choose from the options Origin boardings, PassTransfer and Destination alightings elements that you want to display.

3.  Above the list, click the button labeled with the Stop.

The Select stops window opens.

4.  In the list, select the desired stops and click the Confirm selection button.

Tip: If you click the All button, all transfers at all stops will be displayed.

The list displays the boarding passengers, alighting passengers and transfer events at the desired stops.

Restricting boarding, alighting and transfer events to objects of the line hierarchy or to operators

1.  Open the list PuT analyses > Passenger transfers stops / time profiles (Opening a list).

2.  Choose from the options Origin boardings, PassTransfer and Destination alightings elements that you want to display.

3.  Click the triangle of the button labeled by default with Time profiles.

A list box of objects of the line hierarchy and operators opens.

4.  In the list, click the desired object.

The buttons in the list box and the other options are labeled according to the selected object.

5.  Click the button next to <Object of the line hierarchy/operator>.

The window Select <Object of the line hierarchy/operator> opens.

6.  Select the desired objects or operators from the list and click on the button Confirm selection.

7.  If required, select the option Filter To- and From-<Object of the line hierarchy/operator> separately.

8.  Click the buttons that are labeled with From <Object of the line hierarchy/operator> and To <Object of the line hierarchy/operator>.

9.  Select in each case the desired objects from the list and click Confirm selection.

The list shows the boarding passengers, alighting passengers and transfer events according to the set restrictions.

Displaying sections in item lists

In item lists, you can switch from the classical view to a view by section. The last item will not be displayed in this view.

1.  Open the desired item list (Opening a list).

2.  On the toolbar, click the  Section view icon.

The item list is displayed in the section view.

Note: If you click the icon again, you will return to the classical view.
Limiting matrix display to a selection

You can restrict the display of matrices in the (Matrices) list by using the matrix filter.

1.  Open list Demand > Matrices.

2.  Click next to the Matrix filter input field on the icon .

The Select matrix window opens.

3.  Select the desired matrices (Selecting matrices).

4.  To discard changes in the input fields, click Empty selection button.

5.  Confirm with OK.

The desired matrices are displayed in the list.

Note: You can also open the matrix list if necessary and filter it in different ways.
Restricting the display of connecting journeys to a stop

1.  Open the list PuT supply > Stops > Connecting journeys.

2.  Click the button next to Stop.

3.  Search for the desired stop (Finding network objects in the network).

4.  Mark the desired stop.

5.  Click the Confirm selection button.

The list of connecting journeys is restricted to the selected stop.

Restricting the display of connecting journeys to a vehicle journey

1.  Open the list PuT supply > Stops > Connecting journeys.

2.  Click the button next to Vehicle journey.

3.  Search for the desired vehicle journey (Finding network objects in the network).

4.  Mark the desired vehicle journey.

5.  Click the Confirm selection button.

The list of connecting journeys is restricted to the selected vehicle journey.

Restricting the display of connecting journeys to the direction of the vehicle journey

Open the list PuT supply > Stops > Connecting journeys.

6.  Click the button next to Vehicle journey.

7.  Search for the desired vehicle journey (Finding network objects in the network).

8.  Mark the desired vehicle journey.

9.  Click the Confirm selection button.

10.  Click the button next to Direction.

11.  From the options Outbound connecting journeys, Inbound and outbound connecting journeys and Inbound connecting journeys, select the elements that you want to display.

The list of connecting journeys is restricted to the selected vehicle journey and the selected direction.

Restricting the display of connecting journeys to active vehicle journey items

1.  Open the list PuT supply > Stops > Connecting journeys.

2.  Select the option Show only connecting journeys between active vehicle journey items.

The list of connecting journeys is restricted to the active vehicle journey items.

Restricting the display of connecting journeys to reached and/or missed connecting journeys

Open the list PuT supply > Stops > Connecting journeys.

3.  Click the button next to Status.

4.  From the options Reached connecting journeys, Reached and missed connecting journeys and Missed connecting journeys, select the elements that you want to display.

The list of connecting journeys is restricted to the selected status.