Creating a signal controller at a (main) node
|
Note: A node or main node can only be allocated one signal controller, but a signal controller can be allocated to several nodes or main nodes (Editing node attributes). |
1. Open the desired (main) node in the junction editor (Displaying a network object in the Junction editor).
|
Note: The signal controller will only be allocated to the (main) node if no other signal controller is allocated to it. |
2. On the junction editor toolbar, click the 
Create signal controller button.
The Create signal controller window opens.
3. Make the desired settings (Properties and options of signal controllers).
4. Confirm with OK.
The signal controller is created and allocated to the displayed node or main node. Together with the signal controller, all possible crosswalks are automatically inserted, as long as none exist yet.
Creating signal controllers in the overview
1. On the Network menu, click Signal controllers.
The Signal controllers window opens.
2. Click the 
Create button.
The Create signal controller window opens.
3. Make the desired settings (Properties and options of signal controllers).
4. Confirm with OK.
The signal controller is inserted.
