Defining desired speed decisions

You can add Desired Speed Decisions in links or connectors.

At least one desired speed distribution must be defined for the definition of a Desired Speed Decision (Using desired speed distributions).

Vehicles change their speed exactly at the position of the desired speed decision. Thus, the acceleration phase or the deceleration phase is only after covering this position. Depending on the current speed, the new desired speed is reached only at a certain distance.

Notes:   You can specify that you need not press the Ctrl key when adding network objects (Right-click behavior and action after creating an object). For some network objects there are windows in which the attributes of a network object can be defined and edited. There are lists for this, for all network objects. You can choose whether you want to open a window, a list or neither of the two for the definition of network objects in the Network Editor (Right-click behavior and action after creating an object).

1.  On the network object sidebar, click Desired Speed Decisions.

2.  Hold down the Ctrl key and right-click on the desired position of the desired speed decision in the link or the connector.

A colored bar is added. The Add desired speed decision window opens. You can define the distribution of the new desired speed for the relevant vehicle classes.

3.  Edit the attributes (Attributes of desired speed decisions).

4.  Confirm with OK.

The attributes are saved in the Desired Speed Decisions list.