Creating charts from a network object type

This is not possible for scatter plots.

On the network object sidebar you can select a network object type and use it to configure the data for the chart.

1.  On the network object sidebar, right click the network object type of your choice.

2.  On the shortcut menu, click Create Chart.

The Create Chart window opens. The network object type is automatically entered in the Network object type list box.

3.  Select the x-axis option for Network objects in the Data selection area.

4.  Click the button.

A selection window opens.

5.  Select the desired network objects.

6.  Confirm with OK.

The selected objects are shown in the area on the right.

7.  Select the x-axis option for Attributes in the Data selection area.

8.  Click the button.

A selection window opens.

9.  Select the desired attributes.

Attributes you have already selected are also displayed. These, however, cannot be selected.

10.  Confirm with OK.

The selected objects are shown in the area on the right. A chart preview is displayed if the data selection is valid.

11.  If you do not wish the x-axis to be labeled with the object name, in the X-axis label column, enter the name of your choice.

12.  If you wish, repeat the data selection procedure for simulation runs, time intervals, vehicle classes or pedestrian classes. You can only select these if the selected network object type, base data type or result data type has attributes related to the desired dimension.

A chart preview is displayed if the data selection is valid.

13.  Confirm with OK.

In the Vissim graphical user interface, the Chart <Chart title> window opens. The chart is displayed.

14.  Edit the chart if you so wish (Configuring a created chart).

15.  Reuse the chart if you so wish (Continue using a chart).