During a simulation run, you can show the driving state of each vehicle in the network in the Vehicles In Network list (Displaying vehicles in the network in a list).
During the simulation run, you can dynamically allocate the driving state to the vehicle by choosing the relevant color(Dynamically assigning a color to vehicles during the simulation).
|
Motion state |
Notes |
|---|---|
| Default |
Default state, if none of the following states apply. |
| In queue |
The vehicle is stuck in a traffic jam. At least one queue counter must be defined in the network (Modeling queue counters). |
| Waits for lane change |
Vehicle has been waiting for more than 6s at the last position for the lane change (emergency stop distance) (Attributes of connectors). |
| Ignores interaction vehicle |
The vehicle ignores the interaction vehicle to resolve a deadlock situation (Editing the driving behavior parameter Following behavior). This situation might occur when reversing out of a parking bay. |
| Ignores priority rules |
The vehicle ignores priority rules to resolve a deadlock situation (Modeling priority rules). |
| In priority rule deadlock |
Vehicle is part of a deadlock situation caused by priority rules (Modeling priority rules). |
| Wants to change lanes |
Due to the vehicle route, a lane change becomes necessary that the vehicle has not yet begun. |
| During lane change |
The vehicle is changing lanes. |
| After lane change |
Lane change was performed in the last 6s. |
| Brakes to change lanes |
Vehicle brakes as it needs to change lanes. |
| Brakes cooperatively |
The vehicle brakes cooperatively for an upcoming lane change maneuver of a vehicle, from an adjacent lane to its own lane (Editing the driving behavior parameter Lane change behavior). |
| Loss of attention |
Temporary lack of attention of the driver (Editing the driving behavior parameter Following behavior). |
| Ignores red signal |
The vehicle has decided in the last 3 seconds of simulation to traverse a red signal head or a blocked section of a priority rule because its speed was too high to come to a stop in advance. |
| Brakes heavily |
The vehicle brakes heavily (< -3.0 m/s²). |
| Brakes moderately |
The vehicle brakes moderately (-3.0 m/s² to -1.0 m/s²). |
| Drives backwards |
The vehicle reverses out of a parking bay. |