|
Note: This functionality is only relevant for the public transport. |
With this functionality, you can replace the values of the link run times with the values of the line run times. Here, three cases are distinguished:
- If the time profile items do not match the corresponding links, the run times of the time profiles are applied.
- If no link run times are entered for the transport system, the run times of the time profiles are applied even if the time profiles do not match the corresponding links. In this case, the link run times are interpolated by the length of the link.
- If the link run times are available and the time profile items do not match the corresponding links, the available link run times are projected via the run time from the time profiles.
You can execute the functionality for all, all active links, or links marked in the network editor.
Editing all or all active links
1. If required, set the links active, whose run times you want to set, via
- the spatial selection (Setting network objects active/passive via the spatial selection) and/or
- filter criteria (Using filters to set network objects active or passive).
The selected links are active.
2. In the Network window, right-click the Links button.
The Links shortcut menu opens.
3. Select the Link run times from line run times entry.
The Run times of links from run times of lines window opens.
4. If necessary, select the Only edit active objects option.
5. Make the desired changes.
|
Element |
Description |
|
Weighting |
Use the drop-down list to select the type of weighting.
If a link is part of more than one time profile, the link run time can be determined from the weighted mean of the run times of all time profiles, from the minimum run time of the time profiles, or from the maximum run time of the time profiles which include this link. |
|
Consider only active time profiles |
If the option has been selected, only active time profiles will be taken into account. |
6. Confirm with OK.
The line run times are used as link run times for the public transport systems.
Editing marked links
1. In the network, mark all links whose run times you want to set.
2. Right-click in the network display.
A shortcut menu opens.
3. Select the Link run times from line run times entry.
4. Make the desired changes.
5. Confirm with OK.
The line run times are used as link run times for the public transport systems.
|
Tip: You can also call the function from the shortcut menu of the corresponding list and edit marked objects together. |
