You can normalize surfaces of restricted traffic areas. In this process, the sizes of the surfaces are calculated correctly (Fundamentals: Multi-part surfaces).
You can execute the functionality for all, all active, or all restricted traffic areas marked in the network editor.
Editing all or all active restricted traffic areas
1. If required, set the restricted traffic areas active, whose surfaces you want to normalize, via
- the spatial selection (Setting network objects active/passive via the spatial selection) and/or
- filter criteria (Using filters to set network objects active or passive).
The selected restricted traffic areas are active.
2. In the Network window, right-click the Restr. traffic areas button.
The shortcut menu Restricted traffic areas opens.
3. Select the Normalize surfaces entry.
The Normalize surfaces: Restricted traffic areas window opens.
4. Select whether you want to normalize the surfaces of all restricted traffic areas or just the active ones.
5. Confirm with OK.
The surfaces are normalized.
Editing selected restricted traffic areas
1. In the network, mark all restricted traffic areas whose surfaces you want to normalize.
2. Right-click in the network display.
A shortcut menu opens.
3. Select the Normalize surfaces entry.
The surfaces of the selected restricted traffic areas are normalized.
|
Tip: You can also call the function from the shortcut menu of the corresponding list and edit marked objects together. |
