1. From the Graphics menu, choose Edit graphic parameters.
The Edit graphic parameters window opens.
2. In the navigator, select the entry Lane allocation > Display > tab Active.
|
Notes: You cannot mark lane allocations in the network. You cannot set lane allocations passive. They are, however, displayed according to the settings specified in the Passive tab if the associated nodes are passive. The settings in the Active and Passive tabs are nearly identical. Therefore, only the settings of the Active tab will be described in detail. |
3. Make the desired changes.
|
Element |
Description |
|
Uniform display |
If the option has been selected, the lane allocations of all active nodes are displayed consistently. |
|
Classified display |
If this option is selected, you can classify and show lane allocation based on an attribute (Displaying classified objects based on attribute values). |
|
Options for the uniform display |
Draw
If the option has been selected, the lane allocation is drawn. Draw until scale
Color/Size Here you can specify the size and the color of the lane allocations. Size Size of the lane allocation display in mm Color Use the selection list to select a color for the lane allocation arrows. Draw frame If the option has been selected, the lane allocation is drawn with a frame. |
If this option is selected, lane allocation is drawn up to the scale set when you zoom out 
If the option has not been selected, the lane allocation will always be displayed, irrespective of the network scale.4. Edit the settings in the Passive tab in the same manner if necessary.
5. Confirm with OK.
The lane allocation is displayed according to your settings.
