Using a supply filter for operating groups
You can filter arrival and departure groups separately and thus display them differently.
1. Make sure the Transfers display of regular services window is open (The Transfers display of regular services window).
2. On the toolbar of the window, right-click Supply filter to set a supply filter.
3. Make the desired changes.
Element |
Description |
Use supply filter |
If the option is selected, the supply filter will be applied immediately after you close the window with OK. Tip You can switch the supply filter on or off at any time by clicking the |
Supply for arrival groups / Supply for departure groups |
Use the drop-down list to select a parent element of the line hierarchy for the supply of arrival groups or the supply of departure groups. The vehicle journeys of the service groups are restricted to this selection. You can make different settings for arrival and departure groups. Tip You can, for example, also select all entries simultaneously using the shortcut menu. |
|
Selects all entries currently displayed in the list. |
|
Removes all entries from the selection. |
|
Inverts the current selection. |
|
Selects all network objects in the displayed list that are currently active. |
Display only supply at the stop |
|
|
Click the symbol to transfer the settings for arrival groups to the departure groups. |
|
Click the symbol to transfer the settings for departure groups to the arrival groups. |
|
Click the symbol to swap the settings for departure groups and arrival groups. |
4. Confirm with OK.
The supply filter is applied to the transfers display of regular services.