With the PuT relation-based analysis procedure, you can calculate skims between stop areas from a set of PuT path legs. The results are output in stop area matrices.
1. On the toolbar, click the 
Open 'Procedure sequence' window button.
The Procedure sequence window opens.
2. Add the PuT relation-based analysis procedure of the PuT analyses category to the desired position in the procedure sequence (Setting up and starting the procedure sequence).
3. In the row of the added procedure, click the button in the Reference object(s) column.
The Select demand segments window opens.
4. In the Select mode selection list, select the mode of the demand segments whose matrices you would like to correct.
5. In the Demand segments selection list, select the demand segments whose matrices you would like to correct.
6. Confirm with OK.
The demand segments selected are adopted in the Reference object(s) column.
7. Make sure that the inserted operation is marked and click the Edit button in the Operations section.
The Parameters: PuT relation-based analysis window opens.
8. Make the desired settings (Specify parameters for PuT relation-based analyses).
9. Confirm with OK.
10. Execute the procedure (Executing procedures in the procedure sequence).
The specified stop area matrices are generated.
