Specify parameters for PuT relation-based analyses

1. Make sure that the operation PuT relation-based analysis is marked and click the Edit button in the Operations section.

The Parameters: PuT relation-based analysis window opens.

2. Make the desired changes.

Element	Description
Path selection section	Use the drop-down list to select the desired path filter: All routes Flow bundle routes Only paths filtered by a flow bundle will be considered. Filter for OD pairs Only paths filtered by an OD pair filter or a filter for PuT paths will be considered. Origin zone filter Only those paths are used that start at an active zone. Only active time profiles If the option is selected, only those path legs are active whose time profiles are active. If the option is not selected, all path legs are active. Note Walk links, PuT Aux path legs and Sharing path legs are always inactive. Consider number of transfers If the option has been selected, the number of transfers is taken into account. One matrix is output for each skim matrix with: Paths with no transfers, Paths with one transfer, Paths with two transfers, Paths with more than two transfers. The number of transfers is attached to the code of the output matrix. A string for the number of transfers is attached to the name of the matrix, e.g. “1 transfer”. In addition, the total skim is output, independently of the number of transfers. Analyze path legs If the option has been selected, path legs are analyzed. Note If the option has been selected, the skim Revenue of total path is not calculated.
Skims section	Select the skims you want to calculate: Passenger trips Number of passenger trips Passenger kilometers if metric has been selected as default unit in the user preferences Passenger miles if imperial has been selected as default unit in the user preferences Revenue of total path Revenue of path leg

Element

Description

Path selection section

Use the drop-down list to select the desired path filter:

All routes
Flow bundle routes

Only paths filtered by a flow bundle will be considered.

Filter for OD pairs

Only paths filtered by an OD pair filter or a filter for PuT paths will be considered.

Origin zone filter

Only those paths are used that start at an active zone.

Only active time profiles

If the option is selected, only those path legs are active whose time profiles are active.

If the option is not selected, all path legs are active.

Note

Walk links, PuT Aux path legs and Sharing path legs are always inactive.

Consider number of transfers

If the option has been selected, the number of transfers is taken into account. One matrix is output for each skim matrix with:

Paths with no transfers,
Paths with one transfer,
Paths with two transfers,
Paths with more than two transfers.

The number of transfers is attached to the code of the output matrix. A string for the number of transfers is attached to the name of the matrix, e.g. “1 transfer”.

In addition, the total skim is output, independently of the number of transfers.

Analyze path legs

If the option has been selected, path legs are analyzed.

Note

If the option has been selected, the skim Revenue of total path is not calculated.

Skims section

Select the skims you want to calculate:

Passenger trips
Number of passenger trips
Passenger kilometers if metric has been selected as default unit in the user preferences
Passenger miles if imperial has been selected as default unit in the user preferences
Revenue of total path
Revenue of path leg