|
Note: If your network contains assignment results, you may delete them either directly or within the procedure sequence, e.g. as the procedure which is directly followed by the new assignment calculation (Deleting PrT/PuT assignment results). |
1. Make sure that the requirements for this procedure are met (Fundamentals: Multimodal assignment).
2. From the Calculate menu, choose General procedure settings.
The General procedure settings window opens.
3. Adjust the settings via PrT settings.
- PrT settings(Setting parameters for PrT assignments)
- PrT settings > Impedance and PrT settings > Links VD functions (Definition and application of volume-delay functions)
- PrT settings > Node impedances (Calculating node impedances)
4. Confirm with OK.
The window closes.
5. On the toolbar, click the 
Open 'Procedure sequence' window button.
The Procedure sequence window opens.
6. Add the procedure Multimodal assignment from the Multimodal category to the desired position within the procedure sequence (Setting up and starting the procedure sequence).
|
Note: The procedure is only provided if you have activated the Multimodal add-on ( Enabling or disabling add-ons ). |
7. In the row of the added procedure, click the button in the Reference object(s) column.
The Select demand segments window opens.
8. From the Select mode drop-down list, choose the desired entry for the multimodal assignment.
9. In the Demand segments section, select the desired entry.
|
Tip: Alternatively, you can select multiple demand segments. To select several individual entries hold down the Ctrl key while clicking each single entry. To select several consecutive entries hold down the Shift key while clicking the first and the last entry of the desired portion in the list. |
10. Confirm with OK.
The window closes. The selected demand segments are listed in the Reference object(s) column.
11. Make sure that the inserted operation is marked and click the Edit button in the Operations section.
The Parameters: Multimodal assignment window opens.
12. Set the desired parameters (Parameters of Multimodal assignment).
13. Confirm with OK.
14. Execute the procedure (Executing procedures in the procedure sequence).
The assignment procedure is executed.
