List of base graphic parameters for network editors
You can set the following graphic parameters independently for every Network editor. You can also change graphic parameters during the simulation.
Long name | Description | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Background color |
Background color in 2D mode |
||||||||||||
Show map |
Display or hide background map in 2D mode. The desired map must be selected in the base graphic parameter Map provider. |
||||||||||||
Map provider |
Select a background map from a background map provider |
||||||||||||
Map gray scale |
Display background map in gray tones or color |
||||||||||||
Map intensity |
Background map color intensity: 0 = no color, 100 = maximum color intensity |
||||||||||||
Wireframe mode |
Toggle wireframe |
||||||||||||
Show scale |
Show or hide scale at the bottom left of the Network editor |
||||||||||||
Show grid |
Show 20 m grid as help to position network objects. If you zoom out the network substantially, the grid is no longer shown. |
||||||||||||
Showing the simulation time label |
In the Network Editor, the current simulation time is displayed in simulation seconds or as the time [hh.mm.ss]. The simulation time is also recorded during the recording of video files.
|
||||||||||||
Simulation time label position |
Display position of simulation time in the Network Editor |
||||||||||||
Simulation time offset |
Relative position of simulation time to the label position in the Network Editor
|
||||||||||||
Simulation time label font color |
Font color of simulation time |
||||||||||||
Simulation time label font size |
Font size in pt of simulation time |
||||||||||||
Show logo |
Display the logo at the Logo position. The logo graphic file is selected in the Logo filename box. |
||||||||||||
Logo position |
Position of logo in the network editor |
||||||||||||
Logo offset |
|
||||||||||||
Logo file name |
Name of the logo graphic file Click the symbol to select the file. Vissim supports the following file formats for logos:
|
||||||||||||
Automatic Level Transparency |
Select this option to draw network objects on underlying layers with a decreasing level of transparency. If this option is not selected, the network objects on all layers are displayed the same way. |
||||||||||||
3D mode |
Toggle 3D mode |
||||||||||||
Selection color |
Color of selected network objects |
||||||||||||
Rubberband color |
Color of rectangle dragged open with the mouse for network object selection |
||||||||||||
Show compass |
The compass rose to show the cardinal direction in the Network editor Red tip = North |
||||||||||||
Compass position |
Display position of compass rose in the Network Editor You may turn the compass rose. |
||||||||||||
Compass offset |
Relative position of compass rose in the Network Editor
|
||||||||||||
Show legend |
Select this option to display the legend at the legend position. The legend contains a description of the symbols and colors of the network object types, for which under Graphic parameters, you selected Legend contains <parameter>. |
||||||||||||
Legend offset |
|
||||||||||||
Legend position |
Position in Network editor Default value Bottom right |
||||||||||||
Legend scale |
Factor for enlarged or reduced display of the legend. Value range 0.01 to 100. Default 1.0 |
Superordinate topic:
Information on editing:
Editing graphic parameters for network objects
Editing base graphic parameters for a network editor
Assigning a color to nodes based on an attribute
Dynamically assigning a color to vehicles during the simulation
Assigning a color to vehicles based on an attribute
Assigning a color to pedestrians based on an attribute
Assigning a color to links based on aggregated parameters
Assigning a color to areas based on aggregated parameters (LOS)
Using LOS schemes for showing aggregated pedestrian values
Assigning a color to ramps and stairs based on aggregated parameters (LOS)
Assigning a color to parking spaces, parking lots or parking lot gorups based on an attribute