Evaluating pedestrian travel time measurements

With the evaluation of the pedestrian travel time, you record pedestrians when they are added in the start areas until they enter the associated destination areas.

Note: Pedestrian travel time measurements must be defined in the network (Defining pedestrian travel time measurement).

By default, the data for all pedestrian classes is entered together. You can also show the data for certain pedestrian classes separately in the evaluation (Configuring evaluations of the result attributes for lists).

You can save the following data and data formats:

Output ASCII file MDB table

Attribute file from attribute list

Aggregated data

-

-

Raw data

*.rsrP

-

-

Result of pedestrian travel time measurements

The file with pedestrian travel times *.rsrp contains the following data:

Element

Description

File title

Name of evaluation

File

Path and name of network file

Comment

Optional comment from the simulation parameters

Date

Time of evaluation

Vissim

Version number, service pack number, build number

Attribute names

Description of evaluated data

Data block

Measurement data

Tip: You can also save an evaluation based on the pedestrian origin-destination matrix (Saving pedestrian travel time measurements from OD data to a file).

Example of pedestrian travel time sections: raw data *.rsrP
Pedestrian travel time measurement (raw data)
File:    C:\Users\Public\Documents\PTV Vision\PTV Vissim 2022\Examples Training\Pedestrians\HR.inpx
Comment: 
Date:    03.01.2023 12:23:33
PTV Vissim 2022.00-00* [238187]
 
t          : Time ped. entered dest. area of travel time measurement [sim.second]
No.        : Travel time measurement number
PedNo      : Pedestrian number
PedType    : Pedestrian type
TravDist   : Distance traveled from start to destination area [m]
TravTime   : Time traveled from start to destination are [s]
TimeDelay  : Time delay [s] while traveling from start to destination area
TimeGain   : Time delay [s] while traveling from start to destination area
DevSpeed   : Differences [km/h] between actuel speed and v_des
 
     t; No.; PedNo; PedType; TravDist; TravTime; TimeDelay; TimeGain; DevSpeed;
  17.1;  30;   414;     100;     14.7;     16.1;       5.0;      0.0;      2.7;
  18.4;  29;    56;     100;     17.3;     18.2;       6.3;      0.0;      3.4;
  19.5;  29;    99;     200;     18.0;     19.2;       7.1;      0.0;      3.0;
....
 

Column

Description

t

Time pedestrian entered destination area of travel time measurement [simulation second]

No.

Travel time measurement number

PedNo

Pedestrian number

PedType

Pedestrian type

Dist

Distance traveled from the start area to the destination area

TravTime

Travel time from the start area to the destination area [s]

TimeDelay

Delay [s] from the start area to the destination area:

The total TimeDelay when traveling this distance results from the "lost time" per time step. This is determined from the difference between actual speed and desired speed if the pedestrian is slower than desired. Pedestrians might walk slower than desired when they have to slow down because of other pedestrians, for instance when pedestrian density increases.

Delays through using a detour are not taken into account in the delay.

TimeGain

Time gain [s] from the start area to the destination area:

The total TimeGain when traveling this distance is determined accordingly like the delay. The total "time gain" is determined only if the pedestrian is faster than desired. Pedestrians might walk faster than desired when they are required to do so because of other pedestrians.

DevSpeed

Difference in [km/h] between the actual speed and desired speed while walking from the start to the end of the section.