Configuring evaluations of the result attributes for lists
You can select and configure evaluations whose result attributes you want to show in attribute lists or result lists. The configuration is saved to the file *.inpx.
![]() |
Notes: Evaluation data of previous simulation runs are deleted:
Before Vissim deletes the data, a message is displayed. |
1. Ensure that the desired settings are defined for managing the result data (Managing results)
2. From the Evaluation menu, choose > Configuration > Result Attributes tab.
3. Select the desired evaluations in the Collect data column.
4. Make the desired changes:
Element | Description |
---|---|
Additionally collect data for these classes |
By default, the data for all vehicle classes and pedestrian classes is entered together. You can also show the data for certain vehicle classes and/or pedestrian classes separately in the evaluation. |
Collect data | Select the desired evaluations before the simulation starts |
From time | Simulation seconds in which the evaluation is started |
To time | Simulation seconds in which the evaluation is finished |
Interval | Duration of the evaluation intervals in which the data is aggregated |
More |
Evaluation-specific parameters. These are described in the individual evaluations:
|
5. Confirm with OK.
6. Open the desired program elements in which you want to show the result attributes, for example, attribute lists or result lists of network object types (Displaying result attributes in attribute lists), (Showing result attributes in result lists).
7. If desired, show further columns for the desired attributes in the list.
|
Notes:
|
8. Start the simulation (Running a simulation).
The data from the simulation is shown in the attribute lists or result lists.
![]() |
Tip: After the simulation, you can save lists manually or automatically to an attribute file .att (List toolbar). |
Superordinate topic:
Information on editing:
Showing signal times table in a window
Saving SSAM trajectories to a file
Showing results of queue counters in lists
Related topics:
Showing result attributes in result lists