Saving camera positions
To record a simulation as an AVI file, you need to save the camera positions with the network view of your choice. You then assign keyframes to the camera positions.
You can also save a camera position during a simulation run. When doing so, you can save the 3D perspective of a driver or a pedestrian as camera position as well (Showing 3D perspective of a driver or a pedestrian).
1. Make sure you have selected the 3D mode.
The symbol is selected. The network is displayed in 3D. You do not need to perform the next step if you want to save the camera position during a simulation run, e.g., to save a 3D perspective of a driver or a pedestrian as camera positions.
2. To set the desired camera position, click the Rotate mode (3D) symbol or use the mouse or keyboard.
3. On the Network editor toolbar, in the Selection of camera position list, enter the name of your choice.
4. Confirm with Enter.
![]() |
Tip: You can edit the attributes in the Camera Positions list (Attributes of camera positions). |
Superordinate topic:
Recording a 3D simulation and saving it as an AVI file
Related topics:
Attributes of camera positions