Optima Operational Planning configuration

Optima Opeartional Planning (OOP) requires a set of configurations associated to:

Datasources and TDE parameters can be set updating the file:

C:\optima\<.NET component>\CommandLineTDE.csv

In the usual installation:

C:\optima\<.NET component>\CommandLineTDE.csv

For example, for the TRE component:

C:\optima\TRE\CommandLineTDE.csv

For setting the file CommandLineTDE.csv, see → Setting TDE parameters.

OOP requires to set some specific datasources, as shown in the table:

Datasource Value

DS_SCEN

-1

DS_TPRB

-1

DS_TPRB_OUT

-2

DS_EVNT

-1

DS_CLOC

-2

For additional details on datasources, see → List of datasources.

You must set some parameters listed in the table:

Parameter Value

Description

SimgRequestQueueAddressList

According with the context.

Data type: String

Location of the Simulation Group run request queue.

String format:

<xxx.xxx.xxx.xxx>:<yyyy>

SimuStatusQueueAddressList

According with the context.

Data type: String

Location of the JMS queue to publish Simulation status updates.

String format:

<xxx.xxx.xxx.xxx>:<yyyy>

TreStatusTopicAddress

According with the context.

Data type: String.

Location of the JMS topic to publish TRE status updates.

String format:

<xxx.xxx.xxx.xxx>:<yyyy>

ShowGUI

0

Data type: Integer

Enables the Graphic User Interface (GUI).

  • 0: do not show the GUI.
  • 1: show the GUI (Execute button disabled).
  • 2: show the GUI.

Default value: 2

MNSM

4

Data type: Integer ≥ 0

Maximum number of parallel simulations that can be run.

Important:   When alternative scenarios are available, memory consumption increases proportionally.

Special values:

  • 0: Only the base simulation.
  • N>0: N simulations in parallel with the base simulation.

Important:  → TRE license constraints

Default is 0.