Resetting the lane data of main nodes

Resetting the node geometry at main nodes

Note: You can edit the lanes of individual main nodes in the junction editor You can edit the node geometries of individual main nodes in the junction editor (Editing the geometry of a node).

You can execute the functionality for all, all active main nodes, or main nodes marked in the network editor. When you use the function, all legs, lane turns and associated crosswalks of the selected main nodes are reset to the default values. Optionally, attributes of inbound through lanes at the main node are also reset and allocations of detectors to through lanes are removed. This allows you to correct inconsistent or unwanted changes, for example.

Editing the attribute values of all or all active main nodes

1.  If required, set the main node active whose lane datanode geometries you want to reset to the default values, via

• the spatial selection (Setting network objects active/passive via the spatial selection) and/or
• filter criteria (Using filters to set network objects active or passive).

The selected main nodes are active.

2.  In the Network window, right-click the Main nodes button.

The Main nodes context menu opens.

3.  Select Reset node geometries.

The Reset node geometries at main node window opens.

4.  Select Reset lane data.

The Reset lane data at main nodes window opens.

5.  If necessary, select the Only edit active objects option.

6.  Select the option Also reset attributes of inbound through lanes ... option if you also want to edit the settings for the through lanes and the associated detectors.

7.  Confirm with OK.

The node geometries are reset.

The lane data is reset.

Tip: You can also call up the function via the shortcut menu of the junction editor.

Editing marked main nodes

1.  In the network, mark all main node whose lane datanode geometries you want to reset to the default values.

2.  Right-click in the network display.

A shortcut menu opens.

3.  Select Reset node geometries.

The Reset node geometries at main node window opens.

4.  Select Reset lane data.

The Reset lane data at main nodes window opens.

5.  Select the option Also reset attributes of inbound through lanes ... option if you also want to edit the settings for the through lanes and the associated detectors.

6.  Confirm with OK.

The node geometries are reset.

The lane data is reset.

Tip: You can also call the function from the shortcut menu of the corresponding list and edit marked objects together.