Creating a signal controller

Creating a signal controller at a (main) node

Note: A node or main node can only be allocated one signal controller, but a signal controller can be allocated to several nodes or main nodes (Editing node attributes).

1.  Open the desired (main) node in the junction editor (Displaying a network object in the Junction editor).

Note: The signal controller will only be allocated to the (main) node if no other signal controller is allocated to it.

2.  On the junction editor toolbar, click the Create signal controller button.

The Create signal controller window opens.

3.  Make the desired settings (Properties and options of signal controllers).

4.  Confirm with OK.

The signal controller is created and allocated to the displayed node or main node.

Tip: Alternatively, you can insert signal controllers directly using the shortcut menu of the column header in the list view of the desired object. To do this, select the entry Signalization > Create signal controller.

Creating signal controllers in the overview

1.  On the Network menu, click Signal controllers.

The Signal controllers window opens.

2.  Click the  Create button.

The Create signal controller window opens.

3.  Make the desired settings (Properties and options of signal controllers).

4.  Confirm with OK.

The signal controller is inserted.

Tip: Alternatively, you can also insert, edit, and delete signal controllers under menu Lists > Private transport > Signal controllers.