Creating system routes from time profiles
You can create system routes automatically from existing time profiles. The course and run times of the time profiles will be used.
Notes: System routes are created per stop-stop section, i.e. in between any consecutive stop points. Since time profiles always start and end at stop points, the complete course of a time profile is turned into system routes. System routes are created broken down by transport system and items. This means that, should there be any time profiles with identical attributes except for the transport system, several system routes will be created from them. If there are any time profiles with different items between two stop points within a transport system, several system routes will be created, too. |
1. In the Network window, right-click the System routes button.
The System routes shortcut menu opens.
2. Select the Create from time profiles entry.
The Create system routes from time profileswindow opens.
3. Make the desired changes.
Element |
Description |
Naming |
The following components of names of the system route to be generated can be selected and edited: Prefix Enter an arbitrary text Transport system Select a transport system attribute Start stop point Select a stop point attribute End stop point Select a stop point attribute Notes The following naming rules are effective if there is no system route within the network yet with an identical transport system and course:
Existing system routes can be overwritten or updated when given a new name:
|
Determination of the system route run time |
Select one of the following options for the run times of the system routes: Minimum If the option has been selected, the minimum run time will be determined. Maximum If the option has been selected, the maximum run time will be determined. Average If the option has been selected, the mean run time will be determined. |
Determination of system route length |
Select one of the following options for the lengths of the system routes: Minimum If the option has been selected, the minimum length will be determined. Maximum If the option has been selected, the maximum length will be determined. Average If the option has been selected, the mean length will be determined. |
Use only active time profiles |
If the option has been selected, system routes will only be generated from active time profiles. |
Note: For several time profiles with an identical transport system and an identical course, the resulting attributes of the system route emerge as follows:
|
4. Confirm with OK.
The system routes are generated.