Links: PrT TSys tab
In this tab, you can specify settings for all transport systems of private traffic.
Element |
Description |
Permitted |
If the option has been selected for the transport system, it is permitted on the link. If the option has not been selected for the respective transport system, the link is not closed to the PrT transport system. |
v0 |
Calculated speed in the unloaded network Note In order to determine the value, the values v0-PrT and v0-PrT-Sys are compared. The smaller value of the two is then v0. |
vCur |
Display of the speed of each transport system in the loaded network |
t0 |
Display of the in-vehicle time in the unloaded network |
tCur |
Display of the in-vehicle time in the loaded network |
Volume |
Display of the calculated volume |
Cross-section |
Display of the calculated undirected value |
Impedance |
Display of the calculated impedance |
AddValue |
Free attribute, to which you can allocate a value |
Toll |
Road toll for each PrT transport system Note If the link is allocated to a restricted traffic area, this attribute value is not used for the TRIBUT-Equlibrium_Lohse procedure (Managing restricted traffic areas and Link toll). |