In the Spec. walk times tab, you can edit the matrices of the required walk times between the stop areas of the stop for transfers with a transport system change or with a time profile change.
|
Element |
Description |
|
TSys or Lines/Direction or Time profile |
Use the drop-down list to specify whether you want to edit the matrix of specific transfer walk times for transfers with a change of the transport system, the combination Lines/Direction or with a change of the time profile. |
|
Create |
Use this button to open the Define time window, which contains the drop-down lists From and To for transport systems, lines/directions or time profiles. You can restrict the selection list to only active time profiles. For lines, you can limit your selection to active lines and lines that serve a stop. In the Time field you can enter a value with or without a time unit (h, min or s). If you do not enter a unit, your entry is interpreted as minutes. Confirmed entries will be saved as matrix rows. |
|
Delete |
Use this button to delete the marked row from the matrix. |
|
Notes: A blank field signifies that the transfer between the stop areas is closed. If a value is entered, a transfer is possible within the stated time. If, for a stop, both specific walk times for transport system changes as well as walk times between stop areas have been defined, Visum will use the specific walk times for transport system changes in assignments for transfers between these transport systems. If, in addition, specific walk times have been defined for line changes, Visum will use the specific walk times for line changes. If, on top of that, specific walk times have been defined for time profile changes, these will be used in assignments for transfers between these time profiles at the stop. You can get an overview of all specified transition walk times in the lists Time profiles: Transition walk times , Transport systems: Transition walk times, and Line transfer walk times per direction. |
