Detectors: Nodes tab
Note: The elements Nodes, Main nodes, Lanes, Crosswalks and Distance from stop line will only be displayed if you create or edit in the node or main node section. |
Element |
Description |
Node |
Display of the allocated node Use the button to allocate a node. Using the black triangle next to the button, you can delete the allocation of the node and allocate the nearest node. |
Main node |
Display the allocated main node Use the button to allocate a main node. Using the black triangle next to the button, you can delete the allocation of the main node and allocate the nearest main node. |
Lanes |
Selection of one or several lanes covered by the detector |
Crosswalks |
Selection of one or several crosswalks covered by the detector |
Distance from stop line |
Distance from the front edge of the detector to the nearest signal head of the signal controller on the monitored lane (if a signal head exists). Notes Values can be positive or negative, depending on whether the detector is located in front of or behind the stop line. This value is relevant for data export to Vissim (ANM interface). |