Zones: Basis tab
Description |
|
Relative state |
You can define an area under consideration for the evaluation of the traffic between zones if you assign a relative state to the zones. In the drop-down list, select whether the zone shall be inside of the area under consideration (Internal) or outside of it (External), or whether the state of the zone shall not be relevant to the evaluation of the traffic between zones (Ignore). Note This setting is relevant to the OD pair filter (Exception: Filter for OD pairs). |
AddValue1-AddValue3 |
Free attributes which you can use to enter additional values. Tip If you want to allocate additional information to a network object, you can also create user-defined attributes (Managing user-defined attributes). |
Position |
Coordinates of the zone centroid in the network The coordinates are assigned automatically according to the set coordinate system (Selecting a coordinate system). Note The label of a zone is always displayed at the position of its centroid. |