|
Element |
Description |
|
Length |
Distance between the zone centroid and the node The default value is the direct distance between the zone centroid and the node. |
|
AddValue1-AddValue3 |
Free attributes which you can use to enter additional values. Tip If you want to allocate additional information to a network object, you can also create user-defined attributes (Managing user-defined attributes). |
|
Weight PrT |
Weight share of the connector in the 100 % PrT traffic volume per zone and direction Notes The attribute is only available if the By shares option has been selected for origin and destination connectors for the distribution of the PrT demand of the zone (Zones: Connections tab). For a zone, the total of the PrT connector shares per direction must amount to 100 %. |
|
Weight PuT |
Weight share of the connector in the 100 % PuT traffic volume per zone and direction Notes The attribute is only available if the By shares option has been selected for the distribution of the PuT demand of the zone (Zones: Connections tab). For a zone, the total of the PuT connector shares per direction must amount to 100 %. |
|
Queue length [CarUnits] |
Queue length in car units at the origin connector, which Visum determines after the first simulation phase of the blocking-back model (Blocking back model settings and calculation). The value of the destination connector remains unchanged. |
