Specifying settings for warnings
You can set the extent to which warnings are displayed on the interface and whether they are saved.
1. On the Edit menu, click User preferences.
2. In the navigator, select User interface > Warnings.
3. Make the desired changes.
Element |
Description |
Click this option to save warnings and notes (e.g. when a network or demand data is read in), in addition to error messages, to the error file. |
|
Suppress output of warnings during procedure execution |
Via this option you decide, that warnings which do not endanger the running procedures shall not be displayed on screen. This is especially helpful in case of iterative runs of operations (including Go to the operation), since the running operations are not interrupted unnecessarily. Note Warnings indicating that a procedure cannot be run are still issued on screen. You can display all warnings independently of this option in the Messages window (Messages window). Tips Alternatively, you can suppress the warnings by clicking the Suppress warnings button on the toolbar in the Procedure sequence. You can log the suppressed warnings in the message file to check them there afterwards. |
Dialog boxes |
Show HBEFA warnings If the option is selected, no warnings will be displayed during the HBEFA import. Show warnings when saving If the option is selected, files are overwritten without prompting when they are saved. Show warnings when loading Bing tiles If the option is not selected, warnings are suppressed when loading Bing tiles. |
Enter the maximum number of entries to be displayed in the Messages window. |
4. Confirm with OK.