If you are connected to a Personal Geodatabase, you can specify the following graphic settings for the display and labeling of GIS objects in the network.
1. From the Graphics menu, choose Edit graphic parameters.
The Edit graphic parameters window opens.
2. In the navigator, select GIS Objects.
3. Make the desired changes.
|
Element |
Description |
|
Draw layer GIS |
If this option has been selected, GIS objects are displayed in the network. GIS category Here all GIS categories in the network are listed. Tip With the aid of the Draw For each category, you can switch the display on or off by selecting the respective category in the list. |
and 
buttons, you can edit the order of the drawn layers by marking the desired layer in the list. The top layer is drawn first.4. Make the required changes on the individual pages of the desired GIS categories.
|
Tip: The settings are identical to those of active point objects (Displaying point objects in the Network editor window). |
5. Confirm with OK.
The GIS objects are displayed according to the chosen settings.
