1. On the toolbar, click the 
Open 'Procedure sequence' window button.
The Procedure sequence window opens.
2. Add the PuT interlining matrix procedure of the PuT analyses category to the desired position in the procedure sequence (Setting up and starting the procedure sequence).
3. In the row of the inserted procedure, click the button in the Reference object(s) column.
The Transport System selection window opens.
4. Select the transport system you would like to create the interlining trip matrix for.
5. Confirm with OK.
The transport system appears in the column.
6. Make sure that the inserted operation is marked and click the Edit button in the Operations section.
The PuT interlining matrix window opens.
7. Make the desired settings (Setting parameters for PuT interlining matrices).
8. Confirm with OK.
9. Execute the procedure (Executing procedures in the procedure sequence).
The desired skim matrices for interlining trips of the selected transport system are created.
