1. Before analyzing vehicle journeys or time profiles in the transfers display of regular services, make sure you have specified the desired settings for saving PuT assignment results (Settings for saving PuT assignment results) and have calculated a timetable-based or headway-based assignment (Parameters of headway-based assignment and Parameters of timetable-based assignment).
2. From the View menu, choose Transfers display of regular services.
|
Tip: Alternatively, on the Window program toolbar, click the transfers display of regular services symbol |
.The Transfers display of regular services window opens.
3. Make the desired changes.
|
Element |
Description |
|
Stop |
Click the |
|
Vehicle journeys |
All If this option has been selected, all vehicle journeys of the analysis time interval are taken into account at the stop. Note The display will be refreshed automatically if the number of active vehicle journeys are changed via filter or selection. From line selection If this option has been selected, all vehicle journeys that are active in the line selection in the window Timetable lines (Showing only active vehicle journeys) are taken into account. Note If this option has been selected, you can use the From “Schematic line diagram” If this option has been selected, all vehicle journeys are taken into account that are active in the selected schematic line diagram. Note This option is displayed only if at least one Schematic line diagram window is open. |
|
From |
Start time of the period examined in format hh:mm:ss Note If you have set a calendar, it is also displayed (Selecting a calendar ). You can use the calendar to set the start time of the period of examination. |
|
To |
End time of the period examined in format hh:mm:ss Notes If you have set a calendar, it is also displayed (Selecting a calendar ). You can use the calendar to set the end time of the period of examination. The end point does not necessarily have to lie after the start time. This applies for all calendar types. |
|
Basic cycle |
Here you specify how the time interval of the specified period of examination will be distributed over the circle. You can enter the value with or without a time unit (h, min or s). If you do not enter a unit, your entry is interpreted as minutes. |
|
|
Move the time interval specified under From To by the duration of the Basic cycle forward or backward. |
|
Tolerance |
Here you specify the conditions for the aggregation of vehicle journeys to service groups. Only vehicle journeys with the same direction (departure or arrival), line and direction code can be aggregated to one service group. You can enter the value with or without a time unit (h, min or s). If you do not enter a unit, your entry is interpreted as minutes. |
symbol to select the stop you want to analyze 
