Editing the graphic parameters of stop catchment areas
1. From the Graphics menu, choose Edit graphic parameters.
The Edit graphic parameters window opens.
2. Select the Stop catchment areas page.
3. Make sure that the Draw layer Stop catchment areas option is selected.
4. In the navigator, select the Stop catchment areas > Display entry.
5. Make the desired changes.
Element |
Description |
Draw only for active stops |
If the option has been selected, stop catchment areas are only displayed at active stops. |
Uniform display |
If the option has been selected, all stop catchment areas are drawn consistently. |
Classified display |
If the option has been selected, stop catchment areas can be classified and displayed by an attribute (Displaying classified objects based on attribute values). |
Options for the uniform display |
Draw If the option has been selected, stop catchment areas are displayed. Radius The radius determines the extension of the circular area. Constant If the option has been selected, you can enter a constant radius for all displayed stop catchment areas. Determine from attribute If the option has been selected, via the button, you can select a numerical attribute and enter a factor in the input field. The radii are displayed in proportion to the product of the factor and the attribute values. Fill/Border The stop catchment area is displayed in the colors selected for the fill. Simple fill If the option has been selected, the stop catchment area is displayed consistently in the color specified under Color. Smooth color transition If the option has been selected, the circles around the nodes are displayed with a color gradient. Note The following options are only available if the Smooth color transition option has been selected:
Use the color field to specify the color at the center of the circle.
Use the color field to specify the color at the margin of the circle.
If the option has been selected, the circles around the nodes are displayed with a border.
You can specify the border style in a separate window. To do so, click in the field (Setting the line style properties). |
Note: If you click the Preview button, your changes will immediately be displayed though the Edit graphic parameters window is still open. |
6. Confirm with OK.
The stop catchment areas are displayed according to your chosen settings.