Setting the bar display for transfer flows
Notes: An arrival group describes a set of vehicle journeys that arrive at the same time at the selected stop. The defined tolerance value (Activating the transfers display of regular services) indicates the allowed deviation from the same arrival time under which vehicle journeys are displayed as one arrival group. A departure group describes a set of vehicle journeys that depart at the same time at the selected stop. The defined tolerance value (Activating the transfers display of regular services) indicates the allowed deviation from the exact same departure time under which vehicle journeys are displayed as one arrival group. A service group can be either an arrival group or a departure group. The setting of the graphic parameters is identical for both groups, it is, thus, described for the arrival groups only. Proceed in the same manner when specifying the settings for the departure groups. |
You can select which transfer flows of service groups shall be displayed in the transfers display of regular services.
1. Make sure the bars for the transfer flows are drawn (Setting the graphic parameters for transfer flows).
2. Click the desired icon for the display of the transfer flows.
Symbol |
Name |
Description |
|
Draw all bars |
If this option has been selected, all transfer flows between all service groups are displayed. |
|
Draw the bars of all marked service groups |
If the option has been selected, all transfer flows are displayed that belong to the marked service groups. But also transfer flows of other than the marked service groups are displayed. |
|
Only draw bars between marked service groups |
If the option has been selected, only those transfer flows that run between the marked service groups are displayed. |
|
Transfer display |
Shows possible connecting journeys for marked service groups. The following conditions apply:
Note You can change the time slot for reachable connecting journeys in menu Network > Network settings > tab Attributes in section Connecting journeys > Maximum wait time. |
3. Mark the desired service groups.
Notes: Click to the left of the arrow, to select the arrival group. Click to the right of the arrow, to select the departure group. Alternatively, you can select all arrival and departure groups by right-clicking into the transfers display of regular services and selecting one of the following entries from the shortcut menu:
To clear the existing highlighting, click on a free area of the window. |
The transfer flows of the desired service groups are displayed.
Uniform scaling of the bar display
You can scale the bar display of arrival groups, departure groups, and passenger transfer flows according to the total volume attribute of the visible vehicle journeys in such a way that the bar widths are comparable.
1. Make sure that the transfers display of regular services is open and that the desired graphic settings have been made.
2. On the Transfers display of regular services menu, click Unify bar scaling.
Tip: Alternatively, click the black triangle of the split button on the Transfers display of regular services toolbar and click Unify bar scaling. |
Note: If you make changes to the considered data, you have to call the Unify bar scaling function again, for example after changes to the stop, the line selection, or the time interval under consideration. |