You can adjust the labels of all transfer nodes in different ways:
You can move the label of individual transfer nodes horizontally and vertically:
Setting the label position
For each transfer node, you can specify the label position in the schematic line diagram.
1. In the schematic line diagram, right-click the desired transfer node.
2. From the shortcut menu, choose Set label position.
3. Click the desired label position in the list.
Setting the label orientation
For each transfer node, you can set the label orientation in the schematic line diagram.
1. In the schematic line diagram, right-click the desired transfer node.
2. From the shortcut menu, choose Edit label orientation.
3. Click the desired label orientation in the list.
Setting the display of label attributes
You can specify which label attributes are displayed in the schematic line diagram. You select the label attributes for transfer nodes in the graphic parameters of the schematic line diagram(Setting the display of transfer nodes).
1. In the schematic line diagram, right-click a transfer node.
2. From the shortcut menu, choose Set label attribute.
3. Click the desired label attributes in the list.
Moving a transfer node label
You can move the label of a transfer node.
1. In the schematic line diagram, right-click the desired transfer node.
2. From the shortcut menu, choose Move node label.
3. Use the slide control to move the transfer node label to the desired position.
|
Note: The position of the label is displayed immediately in the schematic line diagram. |
4. Confirm with OK.
