You can specify specific transfer walk times between the stop areas of stops for transfers with a transport system change, line/direction change or time profile change. These are displayed in the Spec. walk times tab of the Edit stop window.
You can execute the functionality for all, all active stops, or stops marked in the network editor.
Editing all or all active stops
1. If required, set all stops active, for which you want to define specific transition walk times, via
- the spatial selection (Setting network objects active/passive via the spatial selection) and/or
- filter criteria (Using filters to set network objects active or passive).
The selected stops are active.
2. In the Network window, right-click the Stops button.
The Stops context menu opens.
3. Select the Set specific transfer walk times entry.
The Set specific transition walk times window opens.
4. Select whether you want to set the specific walk times of all stops or just the active ones.
5. Make the desired changes.
|
Element |
Description |
|
Set times for |
Select whether specific transition walk times shall be set for TSys (transport systems), Lines/Direction, or Time profiles. |
|
From/To |
Selection of the transport systems, lines/direction or time profiles between which the transfers occur |
|
Show only active time profiles or Show only active lines |
If the option has been selected, only active time profiles or linesare displayed. |
|
Time period |
Enter the desired transition walk time |
6. Confirm with OK.
New transition walk times are generated at the stops. Existing transition walk times are overwritten by the new values.
|
Note: You can get an overview of all transition walk times in the lists Time profiles: Transition walk times , Transport systems: Transition walk times, and Line transfer walk times per direction. |
Editing marked stops
1. In the network, mark all stops for which you want to set specific walk transition times.
2. Right-click in the network display.
A shortcut menu opens.
3. Select the Set specific transition walk times entry.
New transition walk times are generated at the selected stops. Existing transition walk times are overwritten by the new values.
|
Tip: You can also call the function from the shortcut menu of the corresponding list and edit marked objects together. |
