Editing surface set

You can select surfaces for fuzzy alignment.

1. From the Edit menu, choose Surfaces > Fuzzy alignment

The Fuzzy surface alignment window opens.

2. Click on the desired entry in the Surface set column.

The Select surfaces window opens.

3. Make the desired changes.

Element	Description
Network object types Zones Main zones Main nodes Territories Points of Interest Restricted traffic areas	All If this option has been selected, all surfaces of the network object type are aligned. None If this option has been selected, no surface of the network object type is aligned. Only active ones If this option is selected, only the surfaces of the active network objects of the desired network object type are aligned. If this option has been selected, the symbol becomes available. You can set network objects active via the filter (Using filters to set network objects active or passive). Only passive If this option is selected, only the surfaces of the passive network objects of the desired network object type are aligned. If the option has been selected, the symbol becomes available. You can set network objects passive via the filter (Using filters to set network objects active or passive).

Element

Description

Network object types

Zones
Main zones
Main nodes
Territories
Points of Interest
Restricted traffic areas

All

If this option has been selected, all surfaces of the network object type are aligned.

None

If this option has been selected, no surface of the network object type is aligned.

Only active ones

If this option is selected, only the surfaces of the active network objects of the desired network object type are aligned. If this option has been selected, the symbol becomes available. You can set network objects active via the filter (Using filters to set network objects active or passive).

Only passive

If this option is selected, only the surfaces of the passive network objects of the desired network object type are aligned.

If the option has been selected, the symbol becomes available. You can set network objects passive via the filter (Using filters to set network objects active or passive).

4. Confirm with OK.