Specifying command line parameters for the start of Visum

Path is specified for the provision of user-specific registry files * .reg, which at the start of Visum are written to the registry (Changes to settings in the configuration file).

Example: -c "C:\Regfiles\Visum20\users\<user>"

Path for providing default registry settings in *.reg registry files (Changes to settings in the configuration file)

Example: -d "C:\Regfiles\Visum20\default"

Specifies the message file in which error messages are output (Using protocol files)

Opens the specified graphic parameters file (Printing the network display)

Opens the specified version file (Opening a version file)

Example: -h „D:\ProjectA\ProjectA.ver“

Opens Visum and performs a version comparison of two version files. The comparison shows the differences of network 2 (comparison network) and network 1 (current network) (Showing differences between the current network and a version file)

Starts Visum in the desired language, if available.

Example: The parameter -IDEU starts Visum in German.

Note

Currently available languages are: German (DEU), English (ENG), French (FRA), Italian (ITA), Spanish (ESP), Portuguese (POR), Polish (POL), Russian (RUS), Hungarian (MAG), Greek (GRE), Chinese (CHI), and Japanese (JAP)

Starts Visum with the desired license

Example: -L c: "\ tmp \ test" The path must be local to your computer. For different start scenarios you need different paths because the name of the license cache file must not be changed.

Note

You can find the required file licenses.data under:

..\User\ <user> \ AppData\Roaming\PTV Vision\PTV Visum 2022 . Your personal settings for managing licenses are saved to this file.

1.  Make the desired changes to the license settings in Visum.

2.  Close Visum.

3.  Copy the licenses.data file to the folder of your choice.

4.  Adjust the properties of the desktop shortcut.

Deactivates an add-on

Example: -modoffPUT

Notes

Here you have to use the defined codes of the add-ons (Add-ons).

Some add-ons only make sense in combination with others. Thus, it may occur that further add-ons will be deactivated at the same time.

You can enable the add-on again after program start ( Enabling or disabling add-ons).

Activates an add-on, if available

Example: -modonPUT

Note

Here you have to use the defined codes of the add-ons (Add-ons).

Suppresses the message when opening a read-only version file

Opens the specified list layout file (Adjusting the list layout)

Opens the specified project directory file (Opening a project directories file)

Registers Visum as COM server. An additional message appears.

Registers Visum as COM server without further query

Corresponds to -reg

Saves the version file under the same name without a prompt and then quits Visum

Specifies log file to which the information is recorded (Using protocol files)

Opens specified procedure parameters file (Saving procedure parameters to a file and loading them from a file)

Deletes the registration of the Visum instance as COM server

Enlarges windows in Visum

Executes the current procedure sequence. Warnings are not displayed, errors lead to cancellation of the procedure.