If analysis time intervals have been defined (Defining a time interval set as analysis time interval set), for each analysis time interval, you can graphically display the attribute values which have changed over time. In the network display each analysis time interval corresponds to a view. You can browse through these views in both directions, either automatically or by hand.
|
Note: For a display of time-varying attribute values, you need to set the required graphic parameters (Specifying basic settings for the Network editor window). |
1. Go to menu View > Toolbars > Analysis time intervals. Then select Visible or Automatic.
|
Note: Choose Automatic to show the Analysis time intervals toolbar, which is displayed if you have defined analysis time intervals. |
2. On the Analysis time intervals toolbar, select the analysis time interval you want to display.
The view referring to the selected analysis time interval is displayed.
3. On the Analysis time intervals toolbar, click the icon of your choice.
|
Icon |
Name |
Description |
|
|
Start the animation of the analysis time intervals (backward) |
Switch to the particular previous interval every 2 seconds, until next interaction |
|
|
Previous analysis time interval (single step) |
Switch from current to previous interval |
|
|
Next analysis time interval (single step) |
Switch from current to next interval |
|
|
Start the animation of the analysis time intervals (forward) |
Switch to the particular next interval every 2 seconds, until next interaction |
|
|
Stop the animation |
Terminate automatic switching |
The corresponding view is displayed.
