1. In the Network editor window, click the Edit mode icon 
.
2. In the Network window, click the Polygons button.
3. Double-click the desired polygon.
The Edit polygon window opens.
4. Make sure that the option Closed has been selected.
5. Click the box of the fill color at the bottom of the dialog.
The Fill and border window opens.
6. Make the desired changes.
|
Section |
Description |
|
Fill style |
Fill color Select the desired color of the fill. Hatch type Select the desired hatch pattern of the fill. Hatch width Specify the desired hatch width of the hatch pattern in mm. |
|
Border |
No border If the option has been selected, a border is not displayed. Same border color as fill color If this option has been selected, the color of the fill is used for the border, too. Border color If the option Same border color as fill color is not selected, you can select the desired color for the border here. Line width Enter the absolute line width in mm Line style Click on the preview to open the window Line style parameters in which you can make additional settings for the line style (Setting the line style properties). |
|
Preview |
Preview showing the edited fill and border |
7. Confirm with OK.
The changes are applied.
