If connections were produced as a result of simulation-based dynamic assignment, you can specify temporal conditions for network objects (Fundamentals: Flow bundle with time reference - PrT).
|
Note: To enable this function, activate the Simulation-based dynamic assignment add-on module ( Enabling or disabling add-ons). |
In the following example, the data is filtered by volumes of the link that meet the flow bundle condition time period 6:00 to 6:10 a.m.
1. On the Graphics menu, click Flow bundle.
The Graphics tools (Flow bundle) window opens.
2. Under Term type, select the traffic type PuT.
3. Select the network object type Link.
4. In the section Calculate for analysis time intervals, specify the desired setting.
|
Element |
Description |
|
Nothing (only AP and AH) |
If this option is selected, the flow bundle is only calculated for the analysis period and analysis horizon. |
|
Only volumes at network objects |
If this option is selected, only volumes and no matrices are calculated. |
|
Volumes at network objects and matrices |
If this option is selected, flow bundle volumes are calculated per analysis time interval. Matrices are generated for departure time-based and arrival time-based flow bundle volumes. |
5. In the network, select the link for the condition.
The object is listed in the Graphics tools (flow bundle) window.
6. Click the 
icon in the Condition column.
The Edit flow bundle term window opens.
7. Click the Temporal restriction tab.
8. Select Use temporal restriction.
9. In the Time interval section, specify the time period 6:00 to 6:10 a.m.
|
Note: The assignment to a time interval is based on the entry time. |
10. Confirm with OK.
The settings are applied.
11. Insert further filter criteria, if required.
12. Click the Execute symbol 
.
The flow bundle filters the link volumes for the specified time period.
