You can make basic settings for stop sequences.
1. Make sure the Timetable lines window is open (Selecting the stop sequence for the timetable).
2. Click the Stop sequence settings symbol 
.
The Stop sequence settings window opens.
3. Make the desired changes.
|
Element |
Description |
|
Stop sequence calculation |
Auto-calculate stop sequence Always auto-calculate stop sequence If this option is selected, the stop sequence is always automatically calculated, and you cannot edit the stop sequence. Note This option corresponds to the behavior of Visum previous to version 14. Allow manual editing of stop sequence, only recalculate if desired If this option is selected, you can edit the stop sequence and perform a recalculation if required. |
|
Default mode of calculation |
Classical The stop sequence is displayed as usual. Hierarchical Stop sequence is calculated hierarchically. . |
|
Stop reference |
Stops The stop sequence is displayed showing stops in the timetable. Stop points The stop sequence is displayed showing stop points in the timetable. |
|
Hide unserved stop events |
Hides all stops without stop events. This function is dynamic. If vehicle journeys are added to the display in the timetable, the unserved stop events are also hidden. Note Served stops are all stops where boarding and alighting is permitted. |
|
Include only active stops /stop points in stop sequence |
Subject to the setting under Stop reference, only active stops will be included in the stop sequence when recalculating the sequence. Existing stops will not be changed. |
4. Confirm with OK.
The settings are applied.
