1. In the Safety section, right-click the 
icon.
|
Tip: Alternatively, you can right-click the Nodes button. From the shortcut menu, choose Graphic parameters. |
The window Edit graphic parameters: Nodes opens.
2. Make the desired changes:
| Element | Description |
|---|---|
| Node attribute |
Selecting attribute for highlighting nodes in the network Note When you select the attributes Accident costs or Accident cost rate, a warning is displayed if the network contains nodes with a very low traffic intensity. In this case, you can set a filter with a minimum threshold (Filtering nodes and main nodes). |
| Threshold |
Entry of the node attribute value which is the basis for legend scaling and coloring when highlighting nodes in the network display. Min: Minimum value of the selected attribute in all nodes Max: Maximum value of the selected attribute in all nodes For APM attributes only (Selecting the APM attribute and showing an accident prediction): Value of selected APM attribute, for which you want to highlight nodes with prediction results that correspond to this threshold in the Network editor. Min: Minimum value predicted for the selected APM attribute in all nodes Max: Maximum value predicted for the selected APM attribute in all nodes You cannot enter a threshold for the APM types attribute. In the Network editor, the control types are displayed, e.g. Signalized or Roundabout. |
| Show legend |
If this option is checked, a legend will visualize the color and size coding for nodes For APM attributes only: Show a legend for the display of nodes that contain values of the selected APM attribute. |
3. Confirm with OK.
The network display is updated.
|
Notes: Further information on extended graphic parameters can be found in the graphic parameters description (Editing the display settings of a POI category). The settings for nodes are adopted for the corresponding main nodes. |
