Add-on module Econolite EOS

Note: You must have a license for the add-on module.

Econolite EOS is a control procedure used in North America. For more information, go to the econolite website (external site):  EOS Datasheet

Some control procedures expect the supply file to be saved in the same directory that contains the *.inpx file. If a control file is saved to a directory that does not meet the requirements of the control procedure, this can cause the program to crash. Vissim does not need the supply files to be saved to a specific directory. Should you have any questions regarding supply files, please contact the company that developed the control procedure.

If you have a configuration file *.cfg

1.  When you define a signal controller, in the Type list, click Econolite EOS.

2.  On the Controller tab, select the desired configuration file *.cfg.

3.  Click the Update signal groups button.

4.  Confirm with OK.

5.  Ensure that the checkbox Automatically open Web Front Panel during simulation is selected.

6.  Confirm with OK.

The Econolite Web View editor opens.

7.  Make the desired changes.

If you do not have a configuration file *.cfg and want Vissim to create one

1.  When you define a signal controller, in the Type list, click Econolite EOS.

2.  On the Controller tab, click the Update signal groups button.

3.  Confirm with Yes.

Vissim then creates the configuration file *.cfg and displays its path.

4.  Confirm with OK.

5.  Ensure that the checkbox Automatically open Web Front Panel during simulation is selected.

6.  Confirm with OK.

The Econolite Web View editor opens.

7.  Make the desired changes.