Setting detector types interactively during a test run
1. On the network object sidebar, click Vehicles In Network. Then click the Edit graphic parameters button 
.
The list with the graphic parameters of the network object type opens (List of graphic parameters for network objects).
2. Select Object visibility.
3. Ensure that neither the Use color scheme option nor a classification are selected.
4. On the network object sidebar, click Detectors. Then click the Graphic parameters button 
.
The list with the graphic parameters of the network object type opens (List of graphic parameters for network objects).
5. Select Object visibility.
|
|
Tips:
|
6. On the Test menu, click > Continuous or Single Step.
The test run is started. During the test run, you can switch back to the Test run single step mode, e.g. the simulation second during which startup of the signal controller program ends.
| Symbol | Name | Description |
|---|---|---|
|
|
Test run continuous |
Starts continuous test run or switches from Test run single step mode to continuous mode. |
|
|
Test run single step |
Starts simulation in Test run single step mode or switches from Test run continuous to Test run single step mode or executes the next single step. |
|
|
Stop test run |
Quit test run |
|
|
Tip: You can set whether you want to activate detectors in test mode with a single or a double click (Defining click behavior for the activation of detectors in test mode). |
7. In the Single Step mode, in the Network Editor, double-click a detector type.
With each click, you switch to the next requirement:
- No actuation: no fill color
- Single actuation: blue
- Repeated actuation: turquoise
- Continuous occupancy: pink
If you double-click on Continuous occupancy, the detector call switches back to No actuation.
|
|
Tip: Alternatively, right-click the detector and on the shortcut menu, click Edit Actuation. Then click the state of your choice. |
Superordinate topic:
