Selecting route choice areas
Through route choice areas Vissim collects the density and number of pedestrians as the basis for the calculation of relative volumes when selecting a route.
You may take into account all areas or ramps in your Vissim network as route choice areas which include intermediate points of the pedestrian route. Or you may select individual areas or ramps to be used as route choice areas.
When you change the course of a partial pedestrian route and therefore position intermediate points in other areas, repeat the steps.
Selecting all areas with intermediate points as route choice areas for a pedestrian route
1. On the Lists menu, click > Pedestrian Traffic > Partial Routes.
2. Right-click the entry of your choice.
3. On the shortcut menu, click Automatically generate route choice areas.
All areas where the intermediate points of the partial pedestrian route are situated are used as route choice areas. You can select the combination method through which the number or density of the pedestrians on the route choice areas is calculated (Route choice method for partial pedestrian routes).
|
Tips:
|
Select an individual area as route choice area
1. On the Lists menu, click > Pedestrian Traffic > Partial Routes.
2. Right-click the entry of your choice.
3. Select Relations > Pedestrian route choice areas.
The right-hand list is shown. If there is no assignment, only the column titles are shown.
4. Repeat the next steps until you have selected all desired areas or ramps in the list.
5. On the shortcut menu, click Add.
6. In the list on the right, right-click a free area.
A new row with default data is inserted.
7. Select the desired area or ramp.