Add-on module McCain 2033
|
Note: You must have a license for the add-on module. |
McCain 2033 is a control procedure deployed in North America.
Some control procedures expect the supply file to be saved in the same directory that contains the *.inpx file. If a control file is saved to a directory that does not meet the requirements of the control procedure, this can cause the program to crash. The supply files of the control procedures Fixed time/Vissig, VAP and RBC can be saved to any directory Vissim can access. Vissim does not need the supply files to be saved to a specific directory. Should you have any questions regarding supply files, please contact the company that developed the control procedure.
|
Note: The GUI file McCaingui.dll and the program file McCain2033.dll are only provided for 32-bit versions of Vissim. From version 11, Vissim is available as a 64-bit edition only. |
- ► When you define a signal controller, in the Type list, click McCain 2033.
Element | Description |
---|---|
Supply file 1 |
SupplyFile1: Supply file of control logic. The files must be saved in the same directory as the Vissim data. |
Program number |
ProgNo: The signal program which is to be simulated. A change of program is possible if the simulation run is in single-step mode. If the new signal program number is confirmed with OK, the changeover is triggered in the next simulation second. |
The control procedure also uses the WTT-file mccain2033.wtt.