Using signal controller type Fixed time (simple)

The signal controller type Fixed Time (simple) allows you to define simple fixed time signal controllers without the Vissig add-on. Signal groups and supply data are stored as attributes of the signal controller. Attributes of the signal controller and its signal groups can be changed during the simulation.

1.  On the Signal Control menu, click > Signal Controllers.

The Signal Controllers list opens.

2.  Right-click the entry of your choice.

3.  On the shortcut menu, click Edit.

The Signal Controller window opens.

4.  In the Type box, select > Fixed Time (simple).

5.  Open the Signal groups tab.

6.  Make the desired changes:

Element Description

MinGreen

Minimum green time

MinRed

Minimum red time

Amber

Amber: Duration of the amber interval within one cycle.

RedAmber

Red-amber time:Duration of the RedAmber interval within one cycle.

Type

Type: Display type of the signal group

  • Normal
  • Green arrow
  • Indicating

ActuationType

Actuation type: Defines whether the signal group shows a green signal by default or turns green only when a call is placed.

  • Default Signal Group: Signal group for the major flow. The signal group shows a steady green signal as long as there is no call from the call detector of the calling signal group.
  • Calling signal group: Signal group for the minor flow:

ClearTm

ClearanceTime

CallDetPortNo

Call detector port number:Port number of the detector calling the green interval

ChkOutDetPortNo

Checkout detector port number:Port number of the detector terminating the green interval